5 Tips To Help You Execute A Thorough Home Inspection

  • Ricky
  • 29 ago
  • 0

Whether you’re buying a new rental property or a home for your family, it’s important to know what you’re getting into. A home inspection is a great way to ensure you get the most value out of your investment. This post looks at five different suggestions to help you get a quality home inspection.

1. Test Any Utilities That Come With The Home

It’s important to have an idea of the working condition of any utilities that come with the home. Making sure the utilities are working is essential especially if you’re buying an older home. You can do quick tests like heating up a cup of water to see if the microwave works. You should also run the dishwasher and ensure it can complete the cycle without leaking.

It’s also a good idea to test the stove by using a thermometer to measure the accuracy of the temperature. Don’t forget to check the gas connection if it’s a gas stove. When looking at the bathroom and kitchen, make sure the sinks and tubs are draining water properly. There should also be consistent water flow from all the faucets.

2. Get A Plumber To Look At The Water Tank And Plumbing

Working with a plumber can be incredibly useful for a home inspection. If you’re buying an older home, it’s worth considering a full sewage inspection. Problems with your sewer and drainage can cause severe problems that aren’t immediately noticeable until you’ve already bought the home.

Make sure the plumber looks at the water heater and checks for leaks. If there are stains on the floor, there’s a good chance you have a leak. The plumber will also ensure that the base of your toilets and tubs are undamaged and can be safely used. Consulting a plumber before you buy a house can save you a lot of hassle.

3. Check The Roof For Decay

Inspecting your roof is an essential part of a home inspection. Problems with your roof can cost significant amounts to repair. The roof should be completely free of broken or cracked shingles. Keep an eye out for low spots that have the potential to allow water to collect. These low areas can cause leaks, which are expensive to repair.

You should also get the inspector to check the eaves for any rot or decay. It’s worth bringing in a roofing expert if it’s an old home still on its first roof. Problems with your roof can cost you more in heating and cooling. Taking the time to inspect your roof thoroughly ensures there are no surprises.

4. Don’t Leave The Home Inspector On Their Own

A common mistake people make is leaving everything up to the home inspector. It’s important to be an active part of the process instead of just taking their word for it. The inspector can only see so much during their first visit to the property. You have the advantage of being familiar with the property and can point out potential issues.

It’s also important to come prepared with questions to ask the inspector. If you notice any potential issues, don’t hesitate to point them out. If you don’t understand what the inspector is saying, don’t be afraid to ask for clarification. It’s better to ask questions before you make your purchase.

5. Check The Condition Of The Basement And The Overall Aesthetic Appeal Of The Home

If the basement is unfinished, you can discover a lot of clues about your home. Cracks and water issues in the basement can be a sign of problems with the foundation. Cracks in the wall or slab may or may not be severe enough to deter your purchase. Consulting a professional for this part of the inspection is essential.

As you inspect the home, take note of the minor details of the condition of the house. Look for any cosmetic blemishes and recent paint jobs. Look out for any suspicious patches or fixes that may indicate a cover-up of a more significant problem. Looking for all the small details will save you from buyer’s remorse.

Previous «
Next »

Leave a Reply

Your email address will not be published. Required fields are marked *